立式充填包装机 Vertical form fill seal packaging machine
主要特征 / Main standard features
该机采用日本PLC编程器和触摸屏人机界面,中英文操作界面,各工作状态,操作指令,故障状态,生产统计等一目了然,操作简便。送膜机构采用交流伺服电机控制,送膜过程平稳,定位精度高,不需润滑,不怕粉尘。生产过程中无须停机即可实施修改参数,调整位置。该机选用高精度智能温控器,热封温度稳定,配齿形封口器,使产品封口牢固。带有自动故障报警显示功能,如切刀切到物料,安全门未关,卷膜跑偏,卷膜用完等。
Using Japan PLC programmer and display screen,which is easy to predominate running state,trouble state,operation order,and production state. Using AC Alternating Current servo motor to control film pulling.In the cause of film pulling it is stable,and with high accuracy orientation.Lubricating is not needed it is possible to revise parameter and adjust position without stopping the machine.Using temperature controller to keep temperature of hot seal unaltered to use dent form sealer to seal film highly series is equipped with automatic trouble alert to find product to be cut by knife,door not to be closed,film wrapping not to run exactly and film to be used up ect.
Gas flushing (Air or Nitrogen gas)
Tear notch
Gusseted device
Air expeller
Hole punch device
Polyethylene sealing system
Vacuum bag system